Disc and Drum Braking System Trainer 763-01
Trainer Includes
- Handbrake assembly
- Diagonally split hydraulic circuit
- Master cylinder
- Brake fluid reservoir
- Brake pedal and light
- Front hubs, discs, and callipers
- Rear hubs and drums
Typical Practical Tasks
This trainer allows students to perform a wide range of automotive brake system experiments and maintenance tasks, including:
- Friction brake theory study
- Drum brake components and operation
- Disc brake components and operation
- Drum brake machining
- Drum brake servicing
- Calliper servicing
- Disc measurement and inspection
- Handbrake components and operation
- Remove, clean, and inspect brake shoes, springs, pins, clips, levers, adjusters, and backing support plates
- Remove, clean, inspect, and measure brake drums
- Remove, inspect, and install wheel cylinders
- Pre-adjust brake shoes and handbrake
- Mount brake drum on lathe and machine braking surface
- Remove, clean, and inspect pads and retaining hardware
- Remove, clean, inspect, disassemble, reassemble, lubricate, and reinstall calliper assembly
- Clean, inspect, and measure brake disc using dial indicator and micrometer
- Remove and replace brake disc
- Check handbrake cables and components for wear, rusting, binding, and corrosion
- Adjust callipers with integrated handbrake system
- Diagnose poor stopping, noise, pulling, grabbing, dragging, or pedal pulsation issues
Items Included
- Disc and Drum Braking System Trainer
- Power Supply Unit (12V, 5A)
Other Items Required
- Automotive workshop tools
Technical Specifications
- Trainer Dimensions (W × D × H): 1200 × 800 × 1410 mm
- Dimensions (Inches): 47 × 32 × 56 inches
- Packed Dimensions (W × D × H): 1444 × 946 × 1590 mm
- Packed Volume: Approx. 2.17 m³ / 77 ft³
- Packed Weight: Approx. 215 kg / 475 lb
The Disc and Drum Braking System Trainer is an effective educational platform for developing practical skills in automotive brake servicing, diagnostics, hydraulic system analysis, and workshop procedures, making it highly suitable for modern automotive training laboratories.
Disc and Drum Braking System Trainer
Order Code: 763-01 P8492-C
The Disc and Drum Braking System Trainer is a real component-based automotive training system designed to help students and instructors demonstrate, investigate, and understand the operation of a typical automotive braking system. This trainer provides hands-on access to both disc brake and drum brake components while also allowing learners to study the functionality of the hydraulic braking circuit.
This training system is ideal for automotive engineering institutions, vocational training centers, and technical laboratories where practical learning is essential. It enables learners to gain experience in servicing, maintenance, inspection, adjustment, and troubleshooting of braking systems used in real vehicles. The trainer can also be integrated with optional cloud-based software, offering online practical activities, interactive theory presentations, investigations, and assessments directly linked to workshop exercises.
